稀土永磁减振器特性的数值模拟分析

简要介绍了目前稀土永磁减振器的研究现状和单质量稀土永磁减振器的结构与工作原理,运用大型有限元软件ANSYS对稀土永磁减振器的工作过程进行数值模拟,分析其在工作过程中的磁通密度、磁力线分布、力学特性以及它们之间的相互关系。研究表明:稀土永磁减振器具有较好的非线性减振效果;ANSYS在模拟稀土永磁减振器工作过程时,能形象直观的反映其在工作过程中的各种特性参数。     

装甲装备人机界面因素对乘员可靠性的影响分析

装甲装备乘员可靠性受内部因素和外部因素的共同影响,而人机界面是外部因素的主要组成部分.通过进行装甲装备人机界面特性分析,确定了乘员可靠性的人机界面影响因素,并结合人的失误致因分析,通过对装备使用者进行问卷调查的形式对其进行了验证.得出的结论对于装备改造和部队乘员选拔都有一定的指导意义.     

双向受载裂纹板的碳纤维复合材料补片的胶接修补分析

建立了碳纤维复合材料补片胶接修补双向受载裂纹板的3D有限元模型,分析了补片的单面胶接修补效果,探讨了补片材料、铺层顺序、补片长度及载荷比等对裂纹应力强度因子的影响规律。结果表明:复合材料补片的存在使裂纹板垂直裂纹方向载荷和平行裂纹板方向载荷发生耦合作用,从而影响补片修补效果。平行裂纹方向的压应力可降低裂纹尖端的应力集中因子,而拉应力可提高裂纹尖端的应力集中因子。     

火灾现场勘验中危险因素探究

火灾现场勘验中存在多种危险因素,严重威胁着勘验人员的人身安全。对倒塌、烟气和触电等火灾现场中几种常见的危险因素,在深入分析其形成机理和危害特征的基础上,有针对性地提出了各种危险因素的预防措施。     

基于缸盖振动的燃油喷射系统故障诊断

对V型12缸柴油机缸盖振动燃烧段信号与缸内压力进行了时域对比,分析了失火时的缸盖振动响应,研究了供油规律随转速变化情况。分析表明缸盖振动中包含喷油器针阀落座的振动响应,研究了基于短时能量动态双阈值端点检测提取针阀落座响应时间特征的方法,利用振动信号的峰值加速度来表征针阀落座的强度。在不同工况及不同状态下提取了针阀落座时间及强度的振动特征,结果表明：振动特征能够有效反映针阀的工作情况,可以用于燃油喷射系统故障的诊断。     

基于振动分析的坦克柴油机汽缸燃烧压力检测方法

针对在坦克实车上不易直接测量柴油机汽缸压力的问题,提出了一种通过测量柴油机汽缸盖振动信号来间接检测汽缸燃烧压力的方法。在某型坦克柴油机上同步测量了汽缸燃烧压力、汽缸盖振动信号和变速箱振动信号,利用自适应滤波方法滤除了汽缸盖振动信号中包含的变速箱振动信号形成的噪声干扰,利用配气相位从时间域分离出由气体燃烧压力激发的振动信号,利用Hilbert变换和小波分解方法分别提取了振动信号和压力信号的特征波形。建立了RBF神经网络模型,以汽缸盖振动信号的包络作为网络输入,实现了汽缸燃烧压力的间接检测。     

关联维数在梁式结构损伤检测中的应用

为探索有效实用的结构损伤检测方法,运用分形理论直接对结构振动信号进行关联维数分析,通过度量系统输出的奇异性来识别结构的局部损伤,提出了基于振动响应关联维数的结构损伤检测方法.简支梁损伤算例结果表明,该方法能够准确地检测出梁式结构单个和多个不同程度的损伤位置,同时关联维数指标变化值会随着损伤程度的增加而增大.与曲率模态指...     

铝合金板材相对均匀性的声-超声评价研究

基于Ritec-SNAP系统建立了声-超声技术实验系统,阐述了该实验系统的原理及应力波因子的定义,分析了在声-超声技术评价过程中用声信号的幅频特性及应力波因子表征材料相对均匀性的可行性。利用建立起来的实验系统,对铝板的相对均匀性进行了声-超声评价的实验研究。实验结果表明,用应力波因子评价铝合金板材的相对均匀性具有可行性。     

Data‐driven variation source identification for manufacturing process using the eigenspace comparison method

Variation reduction of manufacturing processes is an essential objective of process quality improvement. It is highly desirable to develop a methodology of variation source identification that helps quickly identify the variation sources, hence leading to quality improvement and cost reduction in manufacturing systems. This paper presents a variation source identification method based on the analysis of the covariance matrix of process quality measurements. The identification procedure utilizes the fact that the eigenspace of the quality measurement covariance matrix can be decomposed into a subspace due to variation sources and a subspace purely due to system noise. The former subspaces for different samples will be the same if the same variation sources dominate. A testing procedure is presented, which can determine the closeness of the subspaces under sampling uncertainty. A case study is conducted to illustrate the effectiveness of this methodology. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006.     

Noise and vibration measurements in a Viking military vehicle

Noise and whole-body vibration measurements were made in a Viking military vehicle to determine the variation that should be expected during repeat measures, the effect of speed (up to 60 km/h in 5 km/h increments), and during travel over different types of terrain (comprising concrete road, gravel track and rough cross-country). Measurements were made at various crew positions (including the driver and commander) in both the front and the rear cabs in the vehicles. Three translational axes of vibration were measured in each seat. Two speeds were investigated over road (35 km/h and 55–60 km/h) and gravel (20 km/h and 35 km/h) surfaces. The effect of varying speed of the vehicle on the measured noise and vibration magnitudes was also investigated. The highest sound pressure level (L_Aeq) of 104 dB(A) was measured at the commander’s standing position during travel over concrete road at 55 km/h. Higher noise levels occurred for a standing commander compared with when sitting on the seat. A maximum single axis frequency-weighted vibration magnitude of 1.0 m/s² r.m.s. was measured on the driver’s seat during travel over track at 35 km/h. Higher vibration magnitudes occurred during travel over track compared with travel over road. Both noise and vibration exposure of crew within the Viking vehicle increased with increasing speed of the vehicle.